With UHF/PL connectionfor the following support frames:PC90 (F10387)2T PC (F10388)PS support frame (F10386)GS support frame (ZGS-ATR8)

This charger is supplied as standard with the purchase of the portable station ART and allows us to fully charge the battery in less than 7 hours in a completely safe way thanks to the use of the CC-CV technique: If the battery is sufficiently discharged, the charger starts charging in CC (Constant Current) mode, with a high and constant current until the nominal charge voltage of the battery is reached. This way we get a good level of charge in a short time.After this point the charger goes into CV (Constant Voltage) mode to completely charge the battery. This charging phase requires a longer time that ends when the current absorbed by the battery is 20% of the CC value.At this point the charger automatically ends the charge and goes into float mode, providing a small maintenance current to the battery used to internally balance the battery cells.SpecificationsManufacturer: ABT PowerModel: 3PL3016AC Input: 100-240V 50/60HzDC Output: 16,8V 2A

Ersatz-Akku für ART Balloon Station. Bitte Ausführung auswählen.

This rigid and waterproof carry case protects perfecty the portable station when not in use.With 2 safety lock rings and pressure regulation valve.SpecificationsBrand: SeahorseModel: SE520Valid: From ART-23 up to ART-28AWeight: 2,3KgExternal size: 14.90" x 12.13" x 6.88"

This tailored cordura carry bag allow you to protect equipments from shocks and scratches, and at the same time keep the internal temperature barely warm to allow maximum performance of the battery in cold environment.The front side pocket is perfect to keep antennas, microphone and charger in a safe place. The rear pocket has been designed for documentation. Suitable for all portable stations from ART-23 up to date.

People in the basket can significantly attenuate the transponder signals. To solve this problem, the transponder antenna can be hung under the basket using the extension cable.Technical dataCable: RG-58Impedance: 50 ohmsLength: 3 mConnectors: TNC plug and TNC socket

Installation of the latest software on your DBI. To do this, you must send us your DBI and include a prepaid return label with the package.

Technical dataType: End-fed 1/2-wave antennaImpedance: 50 ohmsPolarization: VerticalGain: 5 dB (compared to a portable 1/4-wave antenna)

With TNC connector, e.g., suitable for f.u.n.k.e. GS radio station (Z)GS-ATR8The antenna is the ideal accessory for every balloonist: No deterioration or misalignment due to rain, ice, large metal objects, or peopleNo excessive radiation exposure to people in the immediate vicinity due to large effective areaNo danger from pointed or sharp antenna parts due to flexible construction. Easy to install with six loops, easy to store – almost like a towel. The specially developed radiator elements are completely sewn into a durable fabric bag made of yellow nylon material. This ensures a long service life and reliability in all weather conditions!